
Multiquip Submersible Pump - 674 GPM, 15 HP, 3-Phase, 230 volt
by Pump Sphere
£4,900.00
Multiquip Submersible Pump - 674 GPM, 15 HP, 3-Phase, 230 volt
- 15.0 horsepower, 230 volt, three-phase electric motor
- Water discharge up to 674 GPM
- Maximum head of 105 feet
- Passes up to 0.6 inch spherical solids
- Required accessory: Control Box CB1274
Powerful, versatile, and low maintenance. Incorporates a rugged stainless steel housing, oil-filled, double mechanical pump seals, and molded 33 foot power cable with strain relief. Pump requires a Control Box to provide safe ON/OFF functioning, overload safety shut downs that are thermal & voltage related, and to assist in powering float switch operation
PRODUCT DETAILS
Manufacturer | Multiquip |
---|---|
SKU | ST61230 |
Model Number | ST61230 |
For Potable Water Use | No |
ENGINE/MOTOR DETAILS
Engine/Motor Brand | Multiquip |
---|---|
Fuel Type | Electric |
Starting System | NA |
Horsepower | 15.0 HP |
Phase | 3-Phase |
Pump Voltage | 230 Volt (3-Phase) |
Start Current | 258 Amps |
Rated Current | 43.0 Amps |
Cable Length | 33 Feet |
Cable Strain Relief | Yes |
Pump RPM | 3600 |
Thermal Overload Protect | Yes, With Control Box, Add @ Checkout |
Motor Casing | Cast Iron/Steel |
PUMP DETAILS
Pump Type | Dewatering Pump |
---|---|
Pump Style | Electric Submersible Pump |
Pump Application | Clean Water, Debris Water |
Suction Cover | Stainless Steel |
Dewater Depth | To 1/2 Inch |
Outlet Diameter | 6" |
Max Gallon Per Min (GPM) (See Pump Curve For Your Duty Point Estimates) | 674.0 |
Max Total Head (Static) | 105 Feet |
Maximum Pressure (PSI) | 45 |
Solids Handling | Yes |
Max Solids Handling (Inches) | 0.6" |
Self Priming Pump | Yes, Submergence |
Quick Clean Out | Yes (Impeller) |
Housing Material | Stainless Steel |
Impeller Type | Dynamically Bal. |
Impeller Material | Chrome Steel |
Seal Material (Mechanical Or Other) | Oil-Filled, Double |
Shaft Seal | Yes, Dual |
Temperature Range | To 140 F |
pH Range | 4-10 |
Port Type(s) | Discharge: Male (NPT), NPT |
Submergence Minimum | 6" Above Pump Height (Continuously, To Avoid Vortex) |
Submergence Maximum | 60’ Depth From Surface Of Water (Or As Stated By Manufacturer) |